Skip to Store Area:

Summit Equipment

You Are Here:

Search Site

Wheel Chocks For The Mining Industry - Monster Chocks

Zoom Out
Zoom In

More Views

Click on image above to view full picture

Heavy Equipment 30 Inch Urethane Wheel Chock

Model#: Off Road Heavy Equipment Wheel Chock - 30"

$776.69

Be the first to review this product

SKU#: WHEELCHOCK-MC2000

Add Items to Cart

Monster Chock - MC2000 Heavy Equipment 30" Urethane Wheel Chocks


These extra heavy duty wheel chocks are specifically designed for heavy equipment and the mining industry. They are strong, safe, and easy to handle - yet they hold the largest haul trucks. Each wheel chock is made from tough urethane and includes four side handles and a carrying strap on the back for easy transport. They will not cause tire damage and are virtually unaffected by oils, fuels, or solvents.
For added safety and convenience, "How to Use" guidelines are molded into the back of each chock in both English and Spanish.
30" Urethane Heavy Equipment Off Road Wheel Chocks

  • Length- 30 in.
  • Width- 22 in.
  • Height- 22 in.
    For Mine Haul Trucks with Tire Sizes from 110 in. (2800 mm) to 165 in. (4200 mm) Diameter and Load Capacities up to 400 tons
    Yellow


    • RATED FOR: Mine haul trucks with tire sizes from 110" (2800 mm) to 165" (4200 mm) diameter and load capacities up to 400 tons.

  • Tough urethane construction.
  • Resistant to damage from oils, fuels, and solvents.
  • Safety yellow caution color.
  • Four side handles and carrying strap on the back for easy transport.
  • Replaceable rubber anti-slip traction pads.
  • "How to Use" guidelines molded into each wheel chock.
    SKU WHEELCHOCK-MC2000
    Model Off Road Heavy Equipment Wheel Chock - 30"
    Manufacturer Checkers Industrial
    Warnings - Notices
  • Improper use may result in product failure.
  • Select wheel chock according to vehicle type and size.
  • Always use in pairs and on firm surfaces.
  • Multiple pairs may be required in extreme conditions.
  • Chock in direction of grade.
  • Chock both sides of wheel if direction of grade is undetermined.
  • Use only after parking brake is applied and tested.
  • Center chocks snugly and squarely against tread of each wheel.
  • Always test chocks to insure they meet your specific requirements.
  • Do not drive over wheel chocks.


    OSHA Guidelines
    1910.178 (k) Trucks and railroad cars. (1) the brakes of highway trucks shall be set and wheel chocks placed under the rear wheels to prevent the trucks from rolling while they are boarded with powered industrial trucks.
    		•
    • Newsletter
    Transaction Processing
    E-Commerce Applications - E-Commerce Development - Magento E-Commerce Help by Imagedia

    © 2012 Summit Equipment Outlet, LLC. All Rights Reserved.

    Trusted SSL Certificate