Skip to Store Area:

Construction Equipment

Mining Wheel Chock

Zoom Out
Zoom In

More Views

Click on image above to view full picture

MC1912 22 Inch Urethane Heavy Equipment Wheel Chocks

Model#: Heavy Duty Wheel Chock - MC1912

$0.00

SKU#: CHECKERS-MC1912

Monster Chocks MC1912 Heavy Duty Wheel Chocks



*These are no longer manufactured, please see the MC3012 Wheel Chocks*
MC3012 Wheel Chocks

Monster 1912 Off-Road Urethane Wheel Chocks are specifically designed for mine haul trucks with tire sizes over 105" (2667 mm) diameter and load capacities up to 240 tons. This model is designed for normal haul road grades. They are strong, safe and lightweight, yet they hold the largest haul trucks. These chocks are made from tough, damage resistant urethane. They will not cause tire damage and are virtually unaffected by oils, fuels or solvents. For added safety and convenience, these wheel chocks have "How to Use" guidelines molded directly into the chock.

  • Length- 21.9 in.
  • Width- 14.9 in.
  • Height- 10.6 in.
  • For Mine Haul Trucks with Tire Sizes over 105 in. (2667 mm)
  • Diameter and Load Capacity up to 240 tons;
  • Chock Design for Normal Haul Road Grades
  • Yellow Color for High Visibility


  • RATED FOR: Haul trucks with tire sizes over 105 in. (2667 mm) diameter and load capacity up to 240 tons on normal haul road grades.

  • Tough urethane construction.
  • Resistant to damage from oils, fuels, and solvents.
  • Safety yellow caution color.
  • Recessed carrying handle on back of chock.
  • Replaceable rubber anti-slip traction pads.
  • Mounting hole for ropes, chains or brackets.
  • "How to Use" guidelines molded into each wheel chock.
    SKU CHECKERS-MC1912
    Model Heavy Duty Wheel Chock - MC1912
    Manufacturer Checkers Industrial
    Warnings - Notices
  • Improper use may result in product failure.
  • Select wheel chock according to vehicle type and size.
  • Always use in pairs and on firm surfaces.
  • Multiple pairs may be required in extreme conditions.
  • Chock in direction of grade.
  • Chock both sides of wheel if direction of grade is undetermined.
  • Use only after parking brake is applied and tested.
  • Center chocks snugly and squarely against tread of each wheel.
  • Always test chocks to insure they meet your specific requirements.
  • Do not drive over wheel chocks.

    OSHA SPECIFIES
    1910.178 (k) Trucks and railroad cars. (1) the brakes of highway trucks shall be set and wheel chocks placed under the rear wheels to prevent the trucks from rolling while they are boarded with powered industrial trucks.
  • Construction Equipment Wholesaler
    © 2007-2019 Summit Equipment Outlet, LLC. All Rights Reserved.