Kinshofer P30V-600-4H Orange Peel Grab - Scrap Grapple

Kinshofer P30V-600-4H Orange Peel Grab - Scrap Grapple

The Kinshofer P30V-600-4H is an orange peel grapple for the handling of bulky scrap, with excavators from 22t / 48400 lbs. to 30t / 66000 lbs. operating weight

The cylinders are located on the exterior of each tine which provides optimal protection is provided by piston rod protections.

Oil distributor and hydraulic connections are also perfectly protected within the carrier.

The grab is available with 4 or 5 tines in different shell designs with narrow or wide tines, full- or half-closing, all pointed tines.

While open, the tines stand vertical and provide an optimal penetration.

The grab is equipped with an extremely flat and compact rotator with 4 point bearing.

The acceptance of high transverse moments and impact loads is possible.

The rotator has a high torque and 15 t axial load capacity.

4 or 5 tines available- in 4 different profiles - see drawings

Hydraulic cylinders are fitted with replaceable piston rod protection and are hydraulically cushioned.

Oil distributor with integrated non-return valve mounted directly underneath the rotator.

Oil distribution and hydraulic hoses are protected in the carrier.

Greasing points are easily accessible.

Reinforced tines made of wear-resistant steel HB 400.

Weld-on tips made of high resistant forged and tempered steel HB 500.

Closing force 6000 lbs. at an operating pressure of 5040 psi.

Accurate fittings eliminate tine distortion, solid end stops (open & close).

Tempered bolts, large bearing surface for bolts, specially coated solid steel bushings.

Carrier features a wide opening to accommodate a radiation detector.

Flat rotator KM 15 F273-60 with high nominal maximum moment of deflection of 36900 ft. lbs.