Skip to Store Area:

Construction Equipment

You Are Here:

  • Go to Home Page
  • /
  • Fire Truck Wheel Chocks - 21 Inch Polyurethane Wheel Chock

Search Site

Wheel Chocks For Fire Trucks

Zoom Out
Zoom In

More Views

Click on image above to view full picture

Fire Truck Wheel Chocks - 21 Inch Polyurethane Wheel Chock

Model#: Fire Truck Wheel Chocks - AT2514RP-Y

$0.00

SKU#: CHECKERS-AT2514-RP-Y

Add Items to Cart
  • | Add to Compare

    • AT2514RP-Y All Terrain Polyurethane Fire Truck Wheel Chocks - 21" Wheel Chock



    *These are no longer manufactured, please see the AT3514 Wheelchocks*
    AT3514 Wheel Chocks

    Wheel Chocks designed for fire protection vehicles with a wheel diameter of up to 44".
    Roadblocks 2514 Series All-Terrain Urethane Wheel Chocks are specifically designed for use on fire equipment. They comply with NFPA1901-03 and meet SAE-J348 standard for up to 44 inch wheel diameters.
    These tough, damage resistant polyurethane wheel chocks are resistant to oils, fuels and solvents, and feature anti-slip rubber traction pads.
    For added safety and convenience, a molded carrying handle and safety colors for easy identification.
    Mounting brackets are available for these wheel chocks.

  • Wheel Chock with Rubber Base
  • Bright Yellow Color
  • Length- 21 in.
  • Width- 11.25 in.
  • Height- 12.25 in.


    • Fire Truck Wheel Chocks - 21" Polyurethane Wheel Chock AT2514-RP-Y


    RATED FOR: Fire protection vehicles with up to 44" wheel diameter.

  • Complies with NFPA 1901-1903.
  • Meets SAE-J348 standard.
  • Third party tested for compliance.
  • Tough polyurethane construction.
  • Resistant to oils, fuels and solvents.
  • Recessed carrying handle.
  • Safety color visibility.
  • Yellow with rubber base.
    SKU CHECKERS-AT2514-RP-Y
    Model Fire Truck Wheel Chocks - AT2514RP-Y
    Manufacturer Checkers Industrial
    Specifications NFPA MOUNTING REQUIREMENTS
    NFPA STANDARDS REQUIRE WHEEL CHOCKS TO BE MOUNTED ON FIRE APPARATUS BEFORE BEING PLACED INTO SERVICE.
    Two Chocks must be mounted and readily accessible per NFPA 1901 (Section 7-2), 1902 (Section 7-2), and 1903 (Section 6-1).
    Warnings - Notices
  • Improper use may result in product failure.
  • Select wheel chock according to vehicle type and size.
  • Always use in pairs and on firm surfaces.
  • Multiple pairs may be required in extreme conditions.
  • Chock in direction of grade.
  • Chock both sides of wheel if direction of grade is undetermined.
  • Use only after parking brake is applied and tested.
  • Center chocks snugly and squarely against tread of each wheel.
  • Always test chocks to insure they meet your specific requirements.
  • Do not drive over wheel chocks.


    OSHA Guidelines
    1910.178 (k) Trucks and railroad cars. (1) the brakes of highway trucks shall be set and wheel chocks placed under the rear wheels to prevent the trucks from rolling while they are boarded with powered industrial trucks.
    		•

    • Construction Equipment Wholesaler
    © 2007-2019 Summit Equipment Outlet, LLC. All Rights Reserved.