InPower VCM-13-SPC23 Solid State Relay

InPower VCM-13-SPC23 Solid State Relay Light Dimmer

Your Price: $103.33

InPower VCM-13-SPC23 Solid State Relay Light Dimmer

The VCM-13 is a smart relay with three inputs and two outputs that can be logically controlled to your custom specifications. The three inputs can be power or ground. The outputs are +12 Vdc and can be programmed to time delay on or off, flash or be voltage controlled. Each output is rated at 15 Amps with over-current protection and short-circuit protection.

Part Number: IP-VCM-13-SPC23

The item you are trying to purchase is currently out of stock.
Please enter your name, email, and phone number below.
We will contact you as soon as this product is available.

Name: *

Email: *

Phone: *

Verification: *

Type the word above...

Quantity

Description
Special Features
Specs

InPower VCM-13-SPC23 Solid State Relay Light Dimmer

The VCM-13 is a Customizable Logic Controller offers advanced control with three discrete inputs and two programmable outputs. It allows operators to create tailored behaviors based on real-world vehicle conditions such as door positions, ignition states, or sensor triggers. Supporting logic operations like AND, OR, toggle, and timers, it’s a powerful tool for automating safety interlocks, lighting sequences, or accessory activation in fleets and specialty vehicles.
The Model VCM-13 is a smart power relay with three inputs and two outputs that can be logically controlled by programming to suit your needs.
In the Clutch Pump Limiter application it is designed to protect your clutch pump from damage so it will not be exposed to excessive RPM speeds. The design takes the Clutch Pump Drive signal and Engine RPM from sources like the Clean Tach Out from Ford, or the VSIM in the case of Dodge. The RPM is calculated and these Signals then are logically combined to create Output 1. Output 1 will turn on when the Current RPM greater than RPM_Minimum and less than RPM_Max as long as the original Clutch Pump Coil Voltage is on. When the RPM_ Max is reached, Output1 will turn off and then will not turn back on until RPM_Current is less than RPM_Restart.
Since different vehicles have different methodologies of presenting their Engine RPMs, different programs will be required for different manufacturers.

InPower VCM-13-SPC23 Solid State Relay Light Dimmer

InPower VCM-13-SPC23 Solid State Relay Light Dimmer

Contact Information

INFORMATION AND CUSTOMER SERVICE